Quick Answer: Can I Use A Longer Garage Door Torsion Spring?

Can garage door springs be too strong?

If your springs are too strong, and if you wind the springs the correct number of turns, the door will not stay on the floor when closed.

It will usually not stay in the middle when opened halfway.

However, it will stay up when opened fully..

What do the colors mean on garage door torsion springs?

The color code on a torsion spring indicates whether it is a “right wind” or “left wind” spring, with black indicating right wind and red indicating left wind. Beyond that the torsion spring is color coded so that technicians can determine the thickness, or gauge, of the wire.

How much does it cost to replace a garage door torsion spring?

The cost to replace garage door springs ranges in between $180 to $350 for an expert to do the job satisfactorily. The cost includes the torsion and extension springs’ cost ($10 to $100), labor cost (in between $40 to $70) depending on region and a company.

Does Lowes sell garage door torsion springs?

DURA-LIFT 0.250-in x 2-in Left and Right Wound 2-Pack Gold Steel Garage Door Torsion Spring. 5% Off Your Lowe’s Advantage Card Purchase: Subject to credit approval.

Can a garage door work without springs?

These springs are essential for opening and closing your garage smoothly, especially if you have two. This means that you shouldn’t use your garage door opener without any springs since residential openers don’t typically have much horsepower.

Are longer torsion springs better?

If your garage door springs have lasted less than five years, or if you plan to live where you are for many years, you may want to try the extra long life torsion springs. By using larger springs, you can, in most cases, quadruple your spring life while only doubling the cost of the springs.

What happens if garage door torsion spring breaks?

Torsion springs are located above the garage door and they are what lift the actual weight of the garage door. … Attempting to use a garage door opener to lift a garage door with a broken spring can cause numerous parts on the opener to break. Whenever a spring breaks, the door will not go up.

What is the average life of a garage door spring?

about 10,000 cyclesThe average garage door spring, if correctly installed, should last about 10,000 cycles of opening and closing. If you only go in and out of your garage once a day, that means you should expect a broken garage door spring around 14 years after the spring is first installed.

Should my garage door have two torsion springs?

As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.

How much should a garage door spring cost?

Garage Door Spring Replacement Cost. Replacing garage door springs costs $100 to $300 on average. The springs alone typically run $30 to $75 each but you may find them as low as $15 a piece and up to $100 each. Commercial grade springs can run $300 or more.

How do I test a garage door spring?

Identifying is garage door spring is broken or faultyCheck to see if the springs are visibly worn out.Check to see if there’s a separation in the spring.Check to see if there is a loss of tension in the springs. You can usually tell if there is a loss of tension if the springs have become stretched out or elongated.Mar 14, 2017

How many turns on a 8ft garage door spring?

Anwser: It will still be the same number of turns as your old garage door springs. 7.5 full turns or 30 to 31 quarter turns for a 7ft tall door and 8.1 full turns or 33 to 34 quarter turns on an 8ft tall door.

Why are garage door springs so dangerous?

Garage door springs can be dangerous. The danger lies in what happens if and when the springs suddenly fail. Since the spring is under constant tension, a sudden failure can cause the spring to break apart violently.

Should garage door springs be the same size?

At times the garage door may be designed to take advantage of two different size springs which ensure optimal balance. … However, if the door is not balanced correctly, it will either open too much or too little.

Are all garage door torsion springs the same?

If you have two torsion springs on your door, you should replace both of them. Most doors have springs with the same cycle life rating. In other words, when one spring breaks, the other spring will probably break before too much longer.

How do I know what size torsion spring I need for my garage door?

How to Measure and Order Your Replacement Torsion SpringsStep 1: Determine the Wind Direction. Look at the end of the spring to determine the wind direction. … Step 2: Measure the Wire Size. … Step 3: Measure the Inside Diameter. … Step 4: Measure the Overall Length.Dec 5, 2018

Does length of torsion spring matter?

Replacing a too-big or too-small torsion spring with the right size will balance the door and make it safe again. The door will rise with less effort and remain safely in place. The garage door opener may also need to be replaced if it has been damaged by springs that are too big or too small.

How many turns do you put on a garage door torsion spring?

A rule of thumb with springs is that four quarter turns equals a full revolution and the spring needs to be tightened a full revolution for every foot of door height (e.g. 7-1/2 foot door = 7 revolutions +2 (30 quarter turns).

How do you adjust a garage door torsion spring?

Here are the steps using which you can adjust torsion springs:Step 1: Gather the Supplies. … Step 2: Close the garage door. … Step 3: Find the winding cone. … Step 4: Loosen the screws on the cone. … Step 5: Adjust the tension. … Step 6: Stretch the spring. … Step 7: Tighten the set screws. … Step 8: Test the door and lubricate the springs.