Quick Answer: Can You Install Plywood Over Particleboard?

Should I remove particleboard underlayment?

Particle board is a popular alternative to conventional wood and plywood as it is denser, more uniform and significantly cheaper.

Removing underlayment is an arduous task as particle board underlayment is usually both nailed and glued down to the subfloor..

Can you put wood floors over particle board?

Particleboard, which kind of looks like oatmeal, is comprised of small wood particles that are glued and formed into sheets. These boards, which are typically manufactured in 4″ x 8″ sheets, are not suitable as a subfloor. Structurally, they lack the strength and height needed for a hardwood flooring installation.

Can particle board be used as underlayment?

Particle board is NOT a structural subfloor material and is only manufactured to be used as a inexpensive underlayment filler sheet on top of the main structural subfloor material to raise the height of carpet to a desired level.

Can Thinset go over particle board?

You can put saran wrap over the particle board, then use thin set to level the floor. The plastic wrap will stop the particle board from absorbing the water from the thinset.

What subfloor is needed for hardwood flooring?

PlywoodHardwood flooring: Plywood is the best subfloor for hardwood flooring installation. CDX plywood ranging from 1/2 to 3/4-inch-thick and rated A/C will serve well for any hardwood flooring installation. Tongue-and-groove plywood is available to reduce squeaks and help the subfloor fit together better.

Is particle board a good subfloor?

In general, particle boards are used as an addition to regular subfloor for wall- to-wall carpet installation. Particle board comes in different densities, but still softer compared to OSB boards. … Carpet -> OSB or plywood with particle board (optional) for softness.

How do you remove glued subfloor from particle board?

1″ holesaw on a corded drill. Go thru real quick and buzz around the nail heads (particle board cuts quick and easy) afterwards a prybar will make short work of pulling the sheets. Scrape the remaining chunks and pry the nails up. Less labor intensive than pulling or pounding the nails first.

What type of flooring can be installed over particle board?

Strand woven bamboo is also an option when you need to install floors over particle board. You can choose an engineered strand bamboo or you can choose a solid strand woven floor. Solid bamboo is one of the few solid floors that you can install with the floating method because it is naturally resistant to moisture.

What is the best way to seal particle board?

Apply a layer of clear acrylic sealant on all the edges of the particle board pieces. You should also apply a layer to any areas that may be exposed to moisture. To do this, you need to shake the clear acrylic sealant can, open the lid, and then paint the sealant onto the particle board using a paintbrush.

What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.

Can I put plywood over subfloor?

Laying Plywood Over Floorboards Installing plywood underlayment over a subfloor is fairly straightforward. You’ll start laying plywood over floorboards by putting a square in the corner and leaving about 1/8 inch between the plywood and the wall.